Passa o rato para ampliarElfcam OM3 Multimode Fiber Drum (100m)
Escolhe as datas · Preços + IVA
O que vai na mala
Conteúdo
- 1×Elfcam armoured OM3 multimode duplex fibre cable, LC/UPC to LC/UPC (100 m)
O equipamento
Sobre este equipamento
A 100 m duplex run of OM3 multimode fibre (50/125 µm) terminated LC/UPC at both ends, with steel-tape armour under a black LSZH jacket. OM3 is laser-optimised for 850 nm optics, and 10GBASE-SR is specified to 300 m on OM3, so this length works for 1G and 10G links with SX or SR transceivers.
Use it to link a remote switch, a commentary position or a second stage back to the main rack once copper's 100 m limit runs out. It needs multimode SFP or SFP+ modules at both ends, our Blackmagic SDI fibre converters use single-mode optics, so pair those with the Percon single-mode drum instead.
Destaques
- 01OM3 50/125 µm multimode, duplex, LC/UPC connectors at both ends
- 02Steel-tape armour under an LSZH jacket resists crushing and rodent damage
- 0310GBASE-SR is specified to 300 m on OM3, so 100 m is well within range
- 04Works with 850 nm SX/SR SFP and SFP+ modules in switches and media converters
Perguntas frequentes
Perguntas sobre este equipamento
Multimode 850 nm optics with LC duplex ports, such as 1000BASE-SX SFPs or 10GBASE-SR SFP+ modules. Both ends of the link must use the same type.
Not with our Blackmagic Mini Converter Optical Fiber 12G units: they carry single-mode NovaStar SFPs, so pair those with the Percon single-mode drum. It does work with SDI or Ethernet converters fitted with multimode 850 nm optics at both ends.
The two fibres are marked A and B: one transmits, one receives. If the link stays dark, swap the pair at one end and make sure both SFPs are multimode.
Elfcam rates it for indoor and outdoor use, with steel-tape armour for crush and rodent resistance. Keep dust caps on unmated connectors.
Mais em Rede
