Hover to zoomDJI Power 1000 Portable Power Station
Choose your dates · Prices + VAT
What's in the case
Content list
- 1×DJI Power 1000 portable power station
- 1×AC charging cable
The gear
About this gear
The DJI Power 1000 is a portable power station built on a 1024 Wh LiFePO4 battery, rated to keep over 70% of its capacity after 4000 cycles. Its two Schuko AC outlets deliver up to 2200 W continuous, alongside two 140 W USB-C ports, two USB-A ports and SDC outputs for direct DC charging of DJI gear. On mains it recharges fully in about 70 minutes and can pass power through while it charges. It weighs about 13 kg and runs quietly, from -10 °C to 45 °C.
On productions it powers a remote position where there is no mains: a Starlink uplink, a fibre media converter, a camera or a small lighting setup. A Starlink Standard kit with its router draws about 90-120 W, which gives roughly 7 to 9 hours of runtime.
Highlights
- 011024 Wh LiFePO4 battery, over 70% capacity after 4000 cycles
- 02Up to 2200 W continuous from two Schuko AC outlets
- 03Two 140 W USB-C, two USB-A, SDC and SDC Lite outputs
- 04Full recharge from mains in about 70 minutes, with pass-through power
- 05About 13 kg, 448 x 225 x 230 mm, with two carry handles
FAQ
Questions about this gear
Divide about 870 Wh (the 1024 Wh battery minus inverter losses) by what your gear draws. A Starlink Standard kit at 90-120 W runs for roughly 7 to 9 hours; a 60 W LED light for about 14 hours.
Two Schuko AC outlets (230 V), two USB-C ports up to 140 W, two USB-A ports, and SDC and SDC Lite outputs for DJI chargers.
About 70 minutes from empty to full on mains in fast-charging mode, or about 2 hours in standard mode. It can stay on mains and keep powering your gear while it charges.
Yes, from -10 °C to 45 °C, but it is not water-resistant. Keep it under cover or in a case, off wet ground.
